When I first saw the E3D Chimera I knew it was the right hotend for this printer. It provides dual extrusion in a very compact packag...
Friday, 14 August 2015
Monday, 30 March 2015
Finished Interpolators
The PCBs have finally arrived! The 0.8mm board thickness was important for this design since I wanted them to fit between the connect...
Sunday, 15 March 2015
Interpolator PCB Design
Although we successfully prototyped a working quadrature interpolator, I can't really use a breadboarded circuit as part of my 3d printe...
Thursday, 12 March 2015
Encoder Interpolation
If you travel a few posts back, you might remember there is a fairly critical problem with my MX80L stages: They have the 10nm encoder opti...
Friday, 6 February 2015
Testing the Aerotech ATS125
Testing the Parker MX80L stages was quite easy as they were designed to be compatible with my VIX IH servo drives. The same is not true ...
Thursday, 5 February 2015
Testing the Parker MX80L
It's time to discover whether the components I have purchased are functional. I'm not capable of repairing any problems with an ...
Subscribe to:
Posts (Atom)