Its finally time to connect everything together. I plan to fully assemble the printer and test every component on the bench to ensure the...
Servos and the Smoothieboard
In the previous post my VIX-IH drives were programmed to behave like an average stepper driver. This makes configuration very simple and...
Programming the Servo Drives
The typical stepper or servo drive is a pretty simple component. You connect a motor, apply power, and provide step/direction commands. ...
Project Resumed
It has been roughly one and a half years since the last update to LinearFDM but this project is still alive. I got sidetracked by life a...
Subscribe to:
Comments (Atom)